Zenith porthole 12" console

[baursam]

I have a 28T925R. Have a couple of extra knobs you are welcome to. I'll have a look tomorrow and let you know. The smaller ones in your photos are not the same but will work in a pinch til the correct ones come along

[ha1156w]

Hey! I have that same set! Here are the knobs of the set. Sorry for the lousy quality - old mobile phone....

[Adam]

The CRT is so dusty and dirty I can't read anything off of it. I can see where it says Rauland, which is what I believe Zenith called their picture tubes, so there's a good chance it is the original tube.

Originally Posted by baursam

I have a 28T925R. Have a couple of extra knobs you are welcome to. I'll have a look tomorrow and let you know. The smaller ones in your photos are not the same but will work in a pinch til the correct ones come along

Thanks! Let me know what you come up with.

Originally Posted by ha1156w

Hey! I have that same set! Here are the knobs of the set. Sorry for the lousy quality - old mobile phone....

Thanks for the pics. Unfortunately, I don't have those. Can I see the smaller ones? I have lots of those little knobs, I might still have the right ones.

[baursam]

Hi Adam..here are some pics of the channel selector ( one large knob), and the fine tuning knob that sits under the on off switch....I ll post the others shortly

[baursam]

here are a couple of the on off knob, which lays on top of the fine tuning knob, and the four minis, which are for horizontal vertical, fine tuning and brightness...the knob on the previous post that was identified as fine tuning, is actually for contrast.

I have two extra of the mini knobs, and I might have an extra channel selector. I have pm d someone else who was looking for the channel selector, but have not heard back from them, but will give them a few more days.