Zenith Flyback Numbers?

[ctc17]

What you have there would work in an rca ctc17-35 and with a little more tweaking ctc11-35.

Its really not to complicated. All you need to do is get one for a zenith of similar tube type. If its a roundie get one for a roundie...
Then get the sams for the set you have and the one the flyback goes to. First start with any mechanical mods then the electrical. More than likely the majority of the differences are going to be the values of the parts that are on the board thats mounted tot he flyback.
IE, one may use a solid state focus diode and the other a tube. In that case you could delete the focus tube from your set and use the diode or delete the diode and add the focus tube filament winding to the new flyback.

Im sure I have the sams for most all of the zeniths so if you get some numbers and need some help let me know. I have subbed several color flys

[Kevin Kuehn]

Originally Posted by ctc17

Im sure I have the sams for most all of the zeniths so if you get some numbers and need some help let me know. I have subbed several color flys

Thanks for the help. I don't need one for my Zenith right now, as it's original is working very fine. I'm just pondering what alternate use some of these old numbers might have. This one also seems to look identical to a CTC-15 Fly, only it's minus the PC board parts.