RCA 630TS scored

[bandersen]

Originally Posted by Geist

Hi All;
Bob, If I am looking at the correct thing in your last picture.. The High Voltage cap in your set is in the same place as the one in my set.. Only the one in my set is about twice as thick, but it is mounted in the same place.. Both clips are the same also the springy open type..
THANK YOU Marty

Thanks for the confirmation.

Originally Posted by Phil Nelson

Yes, I used an adustable resistor to replace that one in my 630TS. It's the most practical way to get that oddball value.

Phil Nelson

I knew I read about that somewhere
I just checked another 630TS chassis and all sections of both resistors are open I may up spending more on power resistors than electrolytics!