|
|
|
|
|
#1
02-01-2013, 02:38 PM
|
||||
|
||||
|
I've not been anywheres this neat when I've restuffed cans. Or more precisely I've just hacksawed off the can just above the rubber insulator, while it's still on the chassis. And put one of the bigger replacements above chassis, and smaller ones tied to the terminals below chassis. That way, I don't have to unsolder the wiring under the chassis. Looks fairly ugly, though... I just think of the old cap's terminals as a terminal strip now.
__________________
|
|
#2
02-01-2013, 04:55 PM
|
|||
|
|||
|
Hi All;
I have all six all crimpted and ready to re-mount in the chassis.. If, possible we'll see after I remount them.. But, to me It just isn't right to cut them off from the outside.. But, I may find out that I have no other choice.. If, the remount doesn't work.. Now to start the wiring.. THANK YOU Marty
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
