![]() |
|
|
|
#1
|
||||
|
||||
|
Hmm, it didn't do anything.. No change at all.
It's likely going to be a bad cap.. |
|
#2
|
||||
|
||||
|
Quote:
from the vert or power supply. Try moving the speaker wires, yoke & vol. control wires & see if it changes. Beyond that its prob. a cap. But most if not all of the audio runs off a scan supply so you would get a very high pitch if the supply had crap on it. May end up being a job for a scope........... 73 Zeno
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|