Which wires are the G1s

[Username1]

The single line service switch is very stupid. There was a company that put one in with 3 positions on it. One position was a white full screen, that was helpful, but of course never caught on. Might have been GE, I don't remember.

Pulling the rca plug from the tuner to if strip is ok, I was not sure if you were aware of it. But you have to cut the color knob to zero also, just to be sure no color noise is getting through.

Well, setting the gray scale, is actually making sure the different shades of gray are actually gray. If as the darker gray colors may look a little more green, or red, whatever, those are adjustments made with 2 controls called "drive" but you set basic white screen by turning "screen" controls, there will be 3 of them. Rarely will you have to go back and turn the screens after doing the drives.