Zenith porthole 24G26 no vertical

[kramden66]

all i can recall is that pin 3 of the 6v6 is the right voltage , i have to make notes on the voltages , also forgot to point out there was a 6w6 in the 6v6 socket - why i don't know , no idea if it would work with that in there either.
thanks for the pic .

mike

[Phil Nelson]

Originally Posted by kramden66

there was a 6w6 in the 6v6 socket

My tube references do not list those as interchangeable (although they appear to have the same internal diagram).

This page lists data sheets for both tubes:

http://tubedata.milbert.com/sheets69.html

Perhaps comparing data sheets will tell you whether 6W6 is a reasonable sub for 6V6 in this particular circuit.

Phil Nelson