Anyone have any Zenith Convergence Coils?

[Kamakiri]

I've got one. It's off I believe a '67 Zenith, which is of course a tube set. Mine has no part number, might want to post a pic of what you need so we can see if it's a match

[TinCanAlley]

Originally Posted by Kamakiri

I've got one. It's off I believe a '67 Zenith, which is of course a tube set. Mine has no part number, might want to post a pic of what you need so we can see if it's a match

This is the best picture I have currently. I circled the coil, but the angle is the best. I'll make time to pull her apart later and get some better pics.

[TinCanAlley]

Oh yeah, the coil is warmer than the other two. I don't know if this is normal or I should be looking for a problem. Of course it could be warm because it's just about all the way up and stuck. This could be the cause of the heat (not too hot to touch, but very noticeable). This coil is the blue right screen adjuster.

[Kamakiri]

Here's what I've got. The coil in the center that's all spaghetti'd out is the R/G vertical. Blue coil is the one on the left. If you think it'll work, I'll just send you the whole assembly....packed VERY carefully. These suckers get super brittle with age, which of course you know

[TinCanAlley]

Originally Posted by Kamakiri

Here's what I've got. The coil in the center that's all spaghetti'd out is the R/G vertical. Blue coil is the one on the left. If you think it'll work, I'll just send you the whole assembly....packed VERY carefully. These suckers get super brittle with age, which of course you know

I appreciate it. Let's hold off until I can confirm whether it will work. Will save us time and shipping costs if it won't work.

I did find that a part from JW Miller (6322) is a replacement for it and there are a few places that have them. I need to see if anyone here has ever used one of the replacements from Miller.

Thanks for the offer and if you can hang on just a bit longer while I verify, that would be great.