Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-29-2013, 06:31 AM
holmesuser01's Avatar
holmesuser01 holmesuser01 is offline
VideoKarma Member
 
Join Date: Jul 2005
Location: Asheville NC
Posts: 1,731
I'll try the re-soldering first. I'll pay attention to the Hz driver transformer. I've seen issues with this transformer many times on non-sony sets.

I've got to get the set down off of a 7 foot tall shelf.


Zeno, the only problems I remember with these sets was the power supply failure problem. I stopped working at the box store when these Sony's were about 3 years old.

I know of several sets like mine around here, and mine is the only one that is still going.

I have not run my set constantly like they did.
Reply With Quote
  #2  
Old 08-29-2013, 08:24 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
If its the set I think it is there were 4 caps in the supply that would
crack open, short & blow the 2 converters. Did piles of them.
If you get the bad cons in the drive you will blow the hoz
output sooner than later & it will take the converters & fusable.
Only other thing on them was a few tuners & flybacks.
A very good set all & all.
Good luck with her.

73 Zeno
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:42 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.