More screen anomalies

[old_tv_nut]

Originally Posted by TinCanAlley

I have jumpers with alligator clips, would those be good for grounding? I can clip from ground to ground on the modules and then to a good chassis ground...

Yes, these are exactly what you can do to experiment. Be cautious and make sure you don't connect to something besides ground. Turning the set off while setting up the connection is a good idea.

Regarding all the other questions about your scope, I see you are getting a good one to work with. When you have that, you will be able to use one channel/probe to sync the scope to horizontal and the other to look at various points for your problem.

If it is a ground problem, however, you may see the bars change when you hook up the probe ground leads to the chassis or circuit cards, the same as experimenting with clip leads. This could be either exasperating or fun, depending on how you want to think about it!