|
A second CTC-10 remote transmitter.
Working on a second remote unit. I have good signal after replacing the transistor. Three of the signals seem to have two states. Dead carier (so to speak) and a modulated/ switched 50% duty cycle signal.
Is there a write up for this. I think I have it figured out at the recieve end, but documentation would sure help. I would rether not adjust anything until I have more self notes or real info. This is way different than anything I've seen before! But still very cool if it operates like I think it does.
|
09-23-2013, 06:10 AM
Hybrid Mode
