Are these things I should consider bad

[Username1]

""
Well then I feel better. Now I need to get back into the set to recheck the horizontal sweep as the PP I got put it at 160V and the Sams says it should be 120V. Since the board is driven by the 125V B+, I don't see how it could be putting out a 160V waveform.

""

Is the B+ correct ? are all the B+'s however many there are correct ?
How about B Boost over by the HOT ?

[TinCanAlley]

Originally Posted by Username1

""
Well then I feel better. Now I need to get back into the set to recheck the horizontal sweep as the PP I got put it at 160V and the Sams says it should be 120V. Since the board is driven by the 125V B+, I don't see how it could be putting out a 160V waveform.

""

Is the B+ correct ? are all the B+'s however many there are correct ?
How about B Boost over by the HOT ?

The B+ is at 129V and the B+ Boost is 247 and the same voltages at all their connections points. I'll have to check the other B+s that are in the 20V range. I believe there are two of them (one around 23V and the other around 29V).