|
Another couple of questions.....
Since these caps are used for decoupling and one leg is always on ground, do I need to discharge them or are they automatically discharged when the power to the chassis is removed?
Is it better to test them with an ESR meter, a Capacitance meter or both? With the ESR I can leave them in circuit (no power to chassis). I figure that if I get a bad reading then I should pull it for further testing. If it test good with the ESR, then it's most likely good. Am I going wrong with any of that?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
10-02-2013, 03:23 PM
Hybrid Mode
