|
Here are a couple of pics of the CRT and the shroud w/ground leads. You can see the two from the CRT socket and the one that goes from the shroud to the chassis. If you look closely at the left side of the neck you'll see the scratches, but I don't think they went through the coating. They appear more as surface scratches.
As for the setup switch, I'm gong to use some Deoxit on it first to see if it needs a little cleaning. I figure that being in the same position for so many years and the fact it's an open design, it might be dirty/oxidized.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
10-09-2013, 11:15 AM
Hybrid Mode
