Admiral 19A1, no vertical sweep (video attached)

[Kamakiri]

I didn't plug it in before the recap. The caps looked horrible, and I didn't trust them....I knew from experience that there was no way I was gonna get anything on screen unless I replaced those 6 kV deflection caps, anyway.

The only thing in the entire set that looks like a real abortion is the horizontal sweep transformer. New leads soldered on inside, and a wrapping of black tape on the outside. I'll assume that it's working though, since it has horizontal sweep.

I'll try tube substitution next. I just thought that it was really odd that I'm getting what sounds like horizontal sync bleeding into the audio.

[jr_tech]

The high megohm resistors near the vertical size control are reasonable suspects... I have seen the 10 meg ones *really* increase in value and kill the vertical, but the others are also suspect. Might want to ohm check the vert osc xfmr as well. Good Luck!
jr