|
I found CR3473. Clipped off that and metal corner mount of crt and got from 0 to 4 but realized i had left the ribbon cable off the main board that runs up to the crt board. when i put that back on, meter never went up at all. as for the blue yoke wire, i had to relocate that on up the trace to another location on the back side of the HV board as it had burned the board around that immediate area and the pin where the cable used to mount on had fell off. the smell i get now is just from the instance where i first turn the set on. it sparks there at the burnt area one second. what next?
|
12-24-2013, 09:14 PM
Threaded Mode