|
|
|
|
|
#1
01-18-2014, 10:57 AM
|
||||
|
||||
|
Hard to tell with that picture. Looks like only the top has a distortion/tilt and the bottom is flat and straight. If that's true, it is probably a circuit adjustment, not yoke tilt. Maybe something associated with pincushion adjustments.
|
|
#2
01-18-2014, 03:30 PM
|
||||
|
||||
|
No its just as bad as the top but my pics are no good when it comes to detail.
|
|
#3
01-18-2014, 05:08 PM
|
||||
|
||||
|
Most RCA's had bonded (glued on ) yokes so it
may have come unglued. Also dont loosen the magnets ( farthest back on neck). It may have a PM held down with a wire tie instead of adjustable magnets. In any case only mess with the yoke. If its unglued it takes a different technique........ BTW it also looks to me that the top is NOT a straight line ! 73 Zeno 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
