|
|
|
#11
02-28-2014, 01:35 PM
|
|||
|
|||
|
I should add an addendum to my report above. I have not yet changed any parts on the convergence circuit board. This means that the three sections of diodes are still the original seleniums. Also, there are five tubulars which have yet to be changed. I was hesitant to do this before the basics were out of the way. What do you think? Could this board be the culprit causing the hum in the horizontal scan?
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode