The Ebay CTC-7 is home!

[StellarTV]

Originally Posted by Tom Albrecht

That one was way too easy...

That's what I thought... expecting a full on resto! Of course now, after running it for over a week, a few of its weak points are beginning to show through. Color oscillator first began shifting frequency intermittently, a twist of the fine tuning control to and fro would sometimes bring it back into sync. That was just a touch up of the chroma oscillator slug, been fine ever since.

Problem two, blue background pot opened up, picture looked like it was going way too blue and then way too green. Piece of cake. Had no luck finding a 700k pot, so installed a 1.5meg one shunted with a 1 watt 1.5 meg resistor. Right on the money.

Problem three, horizontal sync is becoming unstable. Gotta dig into that one today. The Sams shows some lovely black beauties inside the HV cage so I just wonder if those were ever replaced. So hope to check into that today.

Originally Posted by IsthmusTV

Nice! I'd love to find one of those stands for my Abington which now just sits on a furniture dolly.

Oh wow, nice! We're now official Abington brothers. Is that the original 21CYP?

Originally Posted by Einar72

I guess you do know the way to San Jose. Only place I've been in Kalifornia. Nice score!

Drive was beautiful too, weather was perfect. I stayed off the main freeways most of the way and it was a windows-down sort of day.

[DaveWM]

Something to watch for on the horz instablility, If still a problem after all the usual suspects have been addressed, check the resistor across the coil that is used to adjust the horz hold. I had that one go way high, resulting in a horz that was excessively sensitive in setting. The resistor is on the board. you cant ck it in circuit since its in P with the coil, so you have to lift one leg to check.

Originally Posted by DaveWM

so you have to lift one leg to check.

Just be careful you don't fall over when you got your leg in the air.

[DaveWM]

oh my...

[Electronic M]

Originally Posted by egrand

Just be careful you don't fall over when you got your leg in the air.

[IsthmusTV]

Originally Posted by StellarTV

Oh wow, nice! We're now official Abington brothers. Is that the original 21CYP?

Yes it is. It's test good, with just a slightly weaker green gun.

I actually did some work on mine this weekend. I've had a nagging intermittent on the video output board that caused the luminance level to go way high. I was sure that it was the socket of the 12BY7, so I replaced it. That was not easy because the board is pretty well cooked so I had lots of problems with lifting traces, etc. And of course, that didn't solve the problem I took another stab at it yesterday, and under magnification, I found a bad solder joint on one end of a resistor that had gone previously undetected (I'd been over this board countless times). I still have a minor intermittent hue shift that I need to track down, but otherwise it's playing great. Long live Abingtons!

Clark