|
Bob,
I have been using the Hakko 808 now for the last 8 months on various projects. It works well on any PC boards, tube sockets, tie strips, etc. You just have to use the correct size tip (for smaller multi-layer PCB via's) or the larger tip like 1.6mm for vintage point to point de-soldering jobs (and set the heat pot for some extra umph). The de-solder braid will fast move farther and farther away from the workbench after using this tool...
Tom (PK)
Last edited by powerking; 04-14-2014 at 06:13 PM.
Reason: Content fix
|
04-14-2014, 05:31 PM
Hybrid Mode
