gassy 21fbp22 ?

[Username1]

Yah, without connecting the tube, the HV lead most likely will not be accurate.
You need to do a current check, then you need to check Horiz output tube cathode current.
And be sure the other elements are ok, Regulator tube, rectifier, B+, b Boost, Focus, Horiz
yoke circuit.....

[timmy]

Originally Posted by Username1

Yah, without connecting the tube, the HV lead most likely will not be accurate.
You need to do a current check, then you need to check Horiz output tube cathode current.
And be sure the other elements are ok, Regulator tube, rectifier, B+, b Boost, Focus, Horiz
yoke circuit.....

did all of this, cathode currant is at 190 and it can swing up or down. reg tube and others, whats odd is on the side of this blue i am having problems with centering on that side. focus volts seem to be ok at about 4500kv sams shows.

[Jon A.]

Originally Posted by timmy

did all of this, cathode currant is at 190 and it can swing up or down. reg tube and others, whats odd is on the side of this blue i am having problems with centering on that side. focus volts seem to be ok at about 4500kv sams shows.

Holy crap! No wonder the area is torched.

Haha, j/k.