|
The socket wasn't one of the things I resoldered, but one of the things I did do when I did the resoldering was to take the IC in and out a few times to make sure it was making contact, so that could have been what fixed my problem.
This picture on set looks so much better than it has in a while, not only was the convergence off, but one of the wires going from the vhf antenna terminals to the vhf tuner had come loose. I forgot how good the picture on this set can look.
Last edited by Adam; 07-28-2014 at 09:02 PM.
|
07-28-2014, 08:54 PM
Threaded Mode