Need Part for Zenith Chromacolor-2

[zeno]

The added wire on the JC chassis is marked grey-brown.
Goes through a 100 ohm to GND. Also goes through 1.1 meg
to low end of the G-2 controls.
No subs listed at that time.

73 Zeno

[robert1]

Originally Posted by zeno

The added wire on the JC chassis is marked grey-brown.
Goes through a 100 ohm to GND. Also goes through 1.1 meg
to low end of the G-2 controls.
No subs listed at that time.

73 Zeno

Thanks!, i knew that this was a oddball trippler that only worked on that particular chassis.