My "New" CT-100 restoration

[dtvmcdonald]

I replaced the damper and it fixed the problem say 90%, which is
plenty good enough.

It turns out that the "shunt" pot in the tube tester was dirty
and it was giving wrong results for diodes.

[dtvmcdonald]

Originally Posted by dtvmcdonald

I replaced the damper and it fixed the problem say 90%, which is
plenty good enough.

That was premature. It did help, but not 90%. I tried replacing the cap in the
yoke, That did make a change, but its not 100% fixed. It reduced the length
of the ringing but made the first ring a little worse.

Any more suggestions?