Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 10-15-2014, 11:42 AM
NoPegs's Avatar
NoPegs NoPegs is offline
The glass is -3dB.
 
Join Date: Mar 2014
Location: Amish Country PA.
Posts: 376
Quote:
Originally Posted by idiotbox View Post
I've got a couple B&W TV's from the 1970s that as soon as I turn them on, emit a painfully high pitched and loud hum. They are a 1975 Quasar and a JVC Model 3240 Videosphere. Is this normal and is there anything I can do to stop/reduce the hum? I have the ears of a dog so maybe others haven't noticed this. It's gotten to the point where I can't be in the same room as the TVs because it is so uncomfortable (which really takes the fun out of putting them to use). I have no clue what exactly causes the hum, but even with the volume all the way down the hum doesn't change. Thanks in advance.
It is the 15.734 kHz horizontal sweep rate inherent in NTSC displays. I share your pain. In grade school I could hear a TV left on from 3 rooms down the hall with the doors open. Even as an adult my hearing still goes up around 17kHz according to the last occupational hearing evaluation I had in 2012.

Or are you experiencing a low frequency hum in the audio circuit? That can usually be fixed, unlike the 15.734 kHz whine.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:30 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.