|
|
|
|
|
#1
11-25-2014, 06:54 PM
|
|||
|
|||
|
I finished replacing all the electroltyics today aw well as the two rectifiers. I tried a power up with my Variac. Not very good results. Tubes lit but no sound no raster. Unfortunately this set is one of those where the chassis is a square with a cutout in the center for the CRT which stays in the cabinet as the yoke can be unplugged. To make test on the underside, I'll have to pull the yoke off the CRT and use my test CRT.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
