|
|
|
#2
12-12-2014, 04:18 PM
|
||||
|
||||
|
I've heard some claim that if you put a pulse of HV across the fill pins and possibly give the neck a tap that you can sometimes re-weld an open filament....At this point I see nothing to loose trying.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode