ctc12 clone beam current

[miniman82]

Sure would be easier to follow this thread if there were some daggone punctuation...


From what I gather, the regulator seems to be working as it should. You said you put a new fly in it? You probably wired it wrong, there's no reason for HV to be drooping like this.

[timmy]

Originally Posted by miniman82

Sure would be easier to follow this thread if there were some daggone punctuation...


From what I gather, the regulator seems to be working as it should. You said you put a new fly in it? You probably wired it wrong, there's no reason for HV to be drooping like this.

yes it is a new flyback and this set always had a hv issue but i thought i had found the problem when i changed the fly i discovered the 1v2 was wired wrong and since correcting that the focus voltage and the overall focus had much improved. i found the mistake and corrected it and checked other areas for other mistakes and having the sams i was able to check areas and fix the wiring mistake. i also double checked all the work i had done by the sams and found none.

[miniman82]

Originally Posted by timmy

I also double checked all the work i had done by the sams and found none.

Sams can have mistakes, bounce the schematic against an RCA one?

[Username1]

Originally Posted by miniman82

Sure would be easier to follow this thread if there were some daggone punctuation...


From what I gather, the regulator seems to be working as it should. You said you put a new fly in it? You probably wired it wrong, there's no reason for HV to be drooping like this.

Yes, he said new fly, and he rewired the focus circuit because something was wrong...
I thought something may be wired wrong too, that is why I asked the questions
about Horiz. Centering, and focus the other day... I figure if they work, and have
some reasonable range, then maybe there is no mistake...... In one of the
earlier threads I also asked about the new fly, and if all the contact points
were correct, or if there were mods on any install note sheet....

It would be cool if someone with recent experience on this chassis takes the point....

That reg. circuit is too simple to be causing all this trouble....

.

[timmy]

Originally Posted by Username1

Yes, he said new fly, and he rewired the focus circuit because something was wrong...
I thought something may be wired wrong too, that is why I asked the questions
about Horiz. Centering, and focus the other day... I figure if they work, and have
some reasonable range, then maybe there is no mistake...... In one of the
earlier threads I also asked about the new fly, and if all the contact points
were correct, or if there were mods on any install note sheet....

It would be cool if someone with recent experience on this chassis takes the point....

That reg. circuit is too simple to be causing all this trouble....

.

well there were no mods or special notes in this set. the hv reg does look simple but i have this set for 2 years plus and was never able to find whats going on with it . so i might just as well try the crt from my other set because of the mark on the inside of the glass on the crt thats in the set now was not there when i first got it but over a small amount of time this set has on it since i have the mark appeared so maybe the interior dag somehow is damaged and causing all of this i dont know but ill have to rule it out once and for all.