ctc12 clone beam current

[DaveWM]

look timmy, the schematic says the blue yoke lead (boost)goes the the lead that is the most distant from the horz out lead correct? yes or no?

Now if that is yes and you get 10.5 on one lug and 11.5 on the other RELATIVE to the horz out lead, which do you think is the most distant? the 10.5 or the 11.5?

just answer that, then I will respond with the next in the logical sequence.

I just want to make sure the fly is hooked up right.

[timmy]

Originally Posted by DaveWM

look timmy, the schematic says the blue yoke lead (boost)goes the the lead that is the most distant from the horz out lead correct? yes or no?

Now if that is yes and you get 10.5 on one lug and 11.5 on the other RELATIVE to the horz out lead, which do you think is the most distant? the 10.5 or the 11.5?

just answer that, then I will respond with the next in the logical sequence.

I just want to make sure the fly is hooked up right.

11.5 would be farther

[DaveWM]

ok so that is the one that is the boost/yoke/shunt etc..

now the other one the 10.5 is the one that goes the the electric lug 2 of the focus coil, do you agree that it is the next one up (ELECTRICLY) from the boost per the schematic?

do you follow this, does what I say make sence when you look at the schematic now? disregarding the number or physical location of the lower two lugs on the fly?