ctc12 clone beam current

[DaveWM]

you have to look at it, I am not there so I do not know, just wire it according to the schematic now that you know the correct lug PER the schmatic. But I would guess yes you need to reverse the focus 1 and 2 since you orig had the fly wired backwards.

[timmy]

Originally Posted by DaveWM

you have to look at it, I am not there so I do not know, just wire it according to the schematic now that you know the correct lug PER the schmatic. But I would guess yes you need to reverse the focus 1 and 2 since you orig had the fly wired backwards.

so you still suggest using the 11.5 for the blue wire thing? what was wired wrong was the heater connections on the 1v2 originally when i found that mix up in the focus circuit

[DaveWM]

11.5 goes to boost/yoke and lug 1 of F coil

10.5 goes to lug 2 only of F coil

[timmy]

Originally Posted by DaveWM

11.5 goes to boost/yoke and lug 1 of F coil

10.5 goes to lug 2 only of F coil

this is whats blowing me away because this is the arrangement it was befor