65 maggie

[timmy]

well it turns out that the g1 159 v is the red the others are 165v the g2 900-1000v and the cathodes 305-318v

[DaveWM]

Originally Posted by timmy

well it turns out that the g1 159v the cathodes 305-318v

well there is the problem cut off due to bias of CRT well over 100v

[DaveWM]

I would start by trying a new video out to see if you can drop the cathodes down. if a known good tube does not help then you are back to checking voltages.

The g1 seem a little low as well. so checking the difference amps voltages would be in order, does the CRT bias have any effect?

[DaveWM]

is this a U45 or an RCA clone?

U45 crt bias pot adjusts the G1 where the RCA adjust the cathodes.