|
the 220 ohm resistor on one end of the bias pot is fine. the .22 cap near the diff amps checks lower in capacitance then another good one i have but its good. it will be very difficlut to reach the bright pot to see if it has a resistor on it. well there is no resistor on the bright pot and without a schematic it will take for ever to find because this thing is a combo and all controls are on one side and has long wires with no plugs to detach from the chassis, omg...
Last edited by timmy; 02-04-2015 at 06:06 PM.
|
02-04-2015, 05:31 PM
Hybrid Mode
