|
|
|
|
|
#1
02-15-2015, 05:03 PM
|
||||
|
||||
|
Beautiful set with that nice wood. I also like the way the European sets have the CRT glass bulging out the front a bit and minimal or no mask around the CRT face. Now that you've rewound two different windings on the flyback, is it closer to working properly?
|
|
#2
02-15-2015, 05:17 PM
|
|||
|
|||
|
Well after rewinding it (also used better quality wire,with better insulation) and removing the short I got the results(see pic) but I wasn't ab-lee to adjust the contrast or brightness or very limited,the sound tuners worked okay
But then later I found a open winding that supply a voltage to one of the grids of the crt,so I had to rewound it all again (PAIN IN THE ASS) still in progress . The pics tell more ... there you can also the the flyback before and after the re-wounding ... Last edited by Retro-guy; 02-15-2015 at 05:25 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
