1941 Zenith 8A02 Console found

[rca2000]

Originally Posted by Electronic M

No. Those later designs were greatly improved and MUCH less prone to the type of failures the 6X5 was infamous for (they learned from their mistakes). Heck if only it would not look like a complete hack job the 6X4 or 6CA4 would probably be decent replacements (with proper socket adaptation) for the 6X5.

Some of the LAST 6X5s supposedly were 6X4s or 6CA4s in an octal envelope, and were as safe as the rest of the later types, but if someone like me who has been doing this for over a decade has a hard time telling the difference, then advising a novice to do so would be a bad move... I don't want to give him advice that could lead to an expensive component (the power transformer) being ruined.

THAT is why I told him to put FUSES in the chassis. I did so on my slivertone stereo chassis I recently acquired. a 1.25A. SB on the primary. I feel a 1A SB would work well on that radio chassis in the primary .


I DID have that exact chassis and maybe the speaker--it was GIVEN to me many years back. Think it was STOLEN a couple of years ago in the garage robbery though...