|
|
|
|
|
#1
04-29-2015, 06:14 PM
|
||||
|
||||
|
P to chassis ground gives me 2.6megs if im measuring correctly.. But I think I'm suppose to measure in between wires going into the donut..
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet.. 
|
|
#2
04-29-2015, 06:28 PM
|
|||
|
|||
|
example Plate lead of 3a3 to plate lead of 6je6 is 635 ohms
p to C2 5.5 agree with timmy, check the focus coil use the term guide, shorted focus coil could account for the low reading from the blue and red yoke wires. shorting the yoke also would explain why it has no effect. Good eyes there Timmy, I think you got it. Last edited by DaveWM; 04-29-2015 at 06:31 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
