Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-20-2015, 04:24 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Not by the book but turn brightness, color & contrast all the way down.
Adj G-2 up til you see retrace lines then turn down til they go away &
screen isnt lit.
Turn things back up & check that the brightness has good range.
For the color adjustments you need to get into the service menus.
ALLWAYS write down anything you change.
The red problem is probably a leaky driver or the CRT though.....

73 Zeno

Quote:
Originally Posted by Console User View Post
When I bought this TV the G2(Screen) I felt was set a little too high. When viewing just the Back Screen it looked a little bright. I backed down the G2 but still seems a little bright? Any suggestions on the correct adjustment of the G2 (Screen)? The Screen seems to have quite a bit of red color in it. This set has no adjustments that I can find for the Color Hue. It makes the Black& Gray in pictures sometimes have a little red tint. Any suggestions on correcting this or what is causing this would be appreciated. I set the EZ Picture to Customs to make my own settings on the TV. The Digital Preset was way too overdone. Thanks.
Reply With Quote
  #2  
Old 07-23-2015, 06:43 PM
Console User Console User is offline
VideoKarma Member
 
Join Date: Aug 2013
Posts: 241
Quote:
Originally Posted by zeno View Post
Not by the book but turn brightness, color & contrast all the way down.
Adj G-2 up til you see retrace lines then turn down til they go away &
screen isnt lit.
Turn things back up & check that the brightness has good range.
For the color adjustments you need to get into the service menus.
ALLWAYS write down anything you change.
The red problem is probably a leaky driver or the CRT though.....

73 Zeno
I have just noticed the red problem is more noticeable and stronger when trying to run the TV on Video. When running the Converter Box or Satellite Receiver on Ch.3/4 it's not nearly as bad.
Reply With Quote
  #3  
Old 08-08-2015, 09:14 AM
Console User Console User is offline
VideoKarma Member
 
Join Date: Aug 2013
Posts: 241
When this TV has no Signal hooked up to it the TV is a True Black & White Snow that looks perfectly normal. However, when you hook up some type of signal whether it be satellite or antenna Converter Box the Back Screen shows too much Red color.

How do you access the Service Menu via the Remote to adjust the Color Bias on this TV?
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.