|
|
|
|
|
#1
07-20-2015, 06:57 PM
|
||||
|
||||
|
Got it back in. Signal is clear and the picture is clearer now but the horizontal hold is still a pain
 It seems I can turn the horiz hold knob about a half turn to right before losing sync but when I turn it to the left I only get about a quarter turn before I lose sync. This horizontal hold issue has been very frustrating but I can live with it until I start using it as a daily watcher. Whats to do next? Should I try and fix the horiz hold once and for all or should I continue on to the picture quality and color adjustments?
__________________
 Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) Last edited by SwizzyMan; 07-20-2015 at 07:03 PM. 
|
|
#2
07-20-2015, 08:07 PM
|
||||
|
||||
|
Okay, here is my attempt at vertical linearity I think I did OK
 Cant get rid of that horizontal distortion. That only really happens on the pattern generator sometimes it is perfectly straight and sometimes it is bent. Note that the line at the top of the screen is obstructed by the mask you can see it better if you are up close.
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
