My Brand New CTC-7!

[SwizzyMan]

I will adjust the noise inverter. The hold flops both ways. I can get a full turn counter-clockwise and a bit less than a quarter turn clockwise.

[DaveWM]

horz hold, why are you setting so you only get 1/4 turn CW? set it in the middle of the range so you get equal adjustment before loss of sync.

[SwizzyMan]

How am I even supposed to tell when I have it in the middle? Does a full picture mean the middle?

[DaveWM]

you can turn it CCW 1 full turn before losing sync

you can turn it CW 1/4 turn before losing sync

so you are setting it too CW to start with.

[SwizzyMan]

OK I get a bit less than a half turn on both sides. adjusting the noise inverter did nothing it was already fully ccw.

[DaveWM]

ok so 1/2 a turn will cause it to flop to diagonal lines either direction?

[SwizzyMan]

Yes sir