|
|
|
|
|
#1
08-04-2015, 08:10 AM
|
||||
|
||||
|
If memory serves me right, yes, the 9-160 could flame out. Usually it was under the two small transformers in front of the the AC line choke. The soldering was dismal and bad connections on the stakes soldered to the PC underneath would crystalize and overheat. There was a piece of cardboard directly underneath that would have holes burned in it a lot of times. I usually saw the 9-160 flybacks just violently arc and blow the horizontal output.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
