|
|
|
#11
08-27-2015, 09:25 PM
|
||||
|
||||
|
OK resistance is good on all pins so just going to have to see what the problem is. I did notice that on the other socket next to the problem socket the middle ground lug is there but on the problem socket it looks like it never had that middle ground lug even though a trace hole is there but has a thin layer of solder over it. Would this raise any red flags?
__________________
 Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode