Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #24  
Old 10-29-2015, 12:14 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Integrators are disc shaped & have 3 wires. Early ones
were dark brown, later ones tan. Part number stats with 87-
The rest of the number is a paint splotch on them. Color
will match the resistor color code. So if you got orange
paint its an 87-3 yellow 87-4 etc. Sometimes the factory
manual or Sams will show the break down of values. If
not there WAS a page out there that listed them all.
Do not confuse them with 3 legged caps that Zenith used.
They were blue or brown & had a 22- part number.

Odds are the crystal is the wrong freq. so DONT go tweaking.
Pull one out of a junker must be a 3.58###.

73 Zeno
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:28 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.