VCR alert

[Username1]

When me & the Wife go from the living room to the bed room, and often finish some
tv show. Often I turn on the bedroom set before turning off the living room set.
I have noticed that there is a very noticeable echo. And if you switch channels
and them go back to the original channel, you can change the echo, it changes delay, or
one set may lead, than after a retune the other set may lead. Both sets are using the
zenith/Insignia OTA tuners, separate tuner for each set.

I can't tell if there is much of a video delay, I assume it's processing time, and when
the unit sync's with the incoming signal, decodes and sends it to the tv, the signal
must be buffered locally to a small degree....

.