![]() |
|
#24
|
||||
|
||||
|
If the yoke unplugs from the chassis, then is it perfectly safe to unplug (also safe if soldered on, but more of a pain to remove and reconnect properly).....Just don't power it up with the yoke disconnected....Pull the HO tube cap if it's series string heaters (if parallel pull the H and V output tubes) and you need to run it without the yoke.
If you have a test CRT and a spare yoke it will probably work safely with any similar era yoke.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Thread Tools | |
| Display Modes | |
|
|