|
|
|
#34
12-17-2015, 03:40 AM
|
||||
|
||||
|
It is basically as I left it in the last post (started other projects and left it as is). I tried to unbolt the fly to put heat-sink compound between it and the chassis for better cooling, but the bolts holding the fly are stubborn, and after trying every safe hand tool I have and penetrating oil with no results....I decided I rather not do it than start trying things that might risk damaging the flyback. I probably should look for a high line voltage tap on the primary of the power transformer and if there is one connect it...I did not install the cooling fan (but I'll give you some fans, parts and advise if you want)...I should also try to make a line bucking transformer for you...
I sent you a PM.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode