RCA 621ts Parts

[pearsonk]

I really need the front Wood Bezel, the one around the picture tube.
The glass also would be nice but the wood bezel I really need.
thank
pearsonk

[vts1134]

Originally Posted by pearsonk

I really need the front Wood Bezel, the one around the picture tube.
The glass also would be nice but the wood bezel I really need.
thank
pearsonk

Great! How much is it worth? I was thinking $85 for the back, $15 for the little brass clip, and $5 for the knob. That's $105 for me. I figure once we hear from enough people we can get an offer together and contact the seller.

By the way, the glass will probably have imperfections in between the two layers. Any that I have seen have this flaw. I prefer to have a new piece of safety glass cut to match so it is clear.

[miniman82]

I need the wood bezel around the CRT and the clips that hold it in. A back would be nice too, but amptech says they will make another run at some point so I'm not really worried about it.

[decojoe67]

Originally Posted by vts1134

.......By the way, the glass will probably have imperfections in between the two layers. Any that I have seen have this flaw. I prefer to have a new piece of safety glass cut to match so it is clear.

Just want to mention an important tip. If you get a new piece cut, put sealant on the freshly cut edge or it will eventually show delamination again as the original.

[tvdude1]

I would purchase the crt if it has any life left in it.

[vts1134]

I sent the seller an email yesterday, I haven't heard back from him yet. I remember that he had two of these for sale when he listed it a while back and the first one sold fairly quickly.