Zenith Microtouch 2G needle issue

[zeno]

There is almost always a hole that may have a plug in
it to get at the rear screw clip. Also on the second screw
you usually DONT have to flip the clip, there is a cut in
the mounting board. So once the other side is loose you
kinda slide it sideways & it pops out.
I doubt Zenith made it any harder, they almost never
made a "physically" unservesable product.

Second place to look is at the tone arm swivel point,
they can get sticky there. You can usually feel it moving the
arm back & fourth.....

73 Zeno