CTC-5 Westcott restoration

[old_tv_nut]

Originally Posted by SwizzyMan

I noticed that on red colored objects there is a slight magenta glow on the border of the object not too noticeable but still a bit irritating. How do I adjust the flesh tones and get rid of that magenta glow that borders red objects?

If you look closely you will probably see a slight greenish border on the opposite edge of the red objects. This is caused by phase distortion in the color signal and can be affected by IF alignment (especially the sound trap) and/or chroma bandpass alignment. Unless it is really bad, it may not be worth trying to redo the alignment, as you likely will find it's as good as possible already.

[SwizzyMan]

Here is a video of the set. https://www.youtube.com/watch?v=9W3kZNQPxbY
It looks a lot better in person since my camera isnt the best for recording. Cant seem to get decent lighting in the room either.

[old_coot88]

Nice work dude. Glad you changed your avatar. The old one was frankly a bit off-putting and could make a person less inclined to wanna participate in the thread.