![]() |
|
|
|
#1
|
|||
|
|||
|
Hey now, that is looking good!
|
|
#2
|
||||
|
||||
|
Very impressive. All you need now is a TV lamp facing the back walls, then you can turn the room lights off and enjoy that great picture. But it looks pretty darn good even in that bright room lighting.
Last edited by Kevin Kuehn; 02-11-2016 at 12:52 PM. |
|
#3
|
||||
|
||||
|
Your TV looks great! Excellent picture for a set that was made sixty years ago (the CTC5 Westcott was made the year I was born).
I don't see a converter box or a VCR/DVD anywhere near the TV. Is that Bonanza episode off the air or cable? ![]() Keep up the good work. These old TVs deserve much better than to be sent to a landfill, and this one obviously won't be.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
|
#4
|
||||
|
||||
|
Thanks a bunch everyone! To reply to jeffhs question, the set is receiving a wired signal from a BT modulator. I can get all the stations provided by my cable company. The modulator is hooked up to my cable box. To be honest, my CTC-5 is producing a better picture than my CTC-7!
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
|
#5
|
||||
|
||||
|
I figured as much, that you might have been using an RF modulator fed by a cable box. Do you have an in-house type of system similar to the one Kamakiri (Tim) in Buffalo uses for his antique TVs? Since Orlando only has three VHF network TV stations (not counting PBS, Fox, et al.), you wouldn't need that many modulators to build a good local distribution system. I think Tim only uses one and changes the input signal at the modulator, depending on what channel he wants to watch. The modulator's output is on channel 9 in his installation, but since Orlando has a local channel 9 any modulator you use would have to output to some other VHF channel.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Yes I do have a home broadcasting system. With plenty of power to reach the whole house. I had it wired temporarily but now I get everything off the rabbit ears! I use only one modulator to do the job.
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
|
#7
|
||||
|
||||
|
Found the original house where this TV came from. Interestingly enough, the house was finished in 1956, the same year this set was manufactured. The set belonged to Mr. Vahram Bagian. Mr. Bagian passed in 1995. He must have been a pretty wealthy man to own this set back in 1956! http://www.realtor.com/realestateand...0_M48576-54870
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
|
#8
|
||||
|
||||
|
I have noticed that when I am watching the set and a picture with a lot of white light comes on the whole screen has a shade of green to it, once the white light goes away the green tint goes away. I remember reading that the 21AXP22's phosphors gave everything a greenish tint. Is this the same with the A version? Or is this occurrence circuit related?
__________________
Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) |
![]() |
| Thread Tools | |
| Display Modes | |
|
|