Yet another Zenith To identify

[Electronic M]

Originally Posted by Dreamsbeard

Oh and by the way could a moderator change the title of the thread to "identify" instead of "identified"...it makes my eyes bleed haha

Thanks!

Your eyes should stop bleeding soon....If not see a doctor.

[Dreamsbeard]

Originally Posted by Electronic M

Your eyes should stop bleeding soon....If not see a doctor.

Haha, they stopped bleeding thanks!

So, as everyone suggested I removed the 9-88 module and the sound module, cleaned contact and put back in place, and I must have done somenthing right because now, I have absolutly no sound Haha. I checked the speaker and its got 14.6 ohms across with the wires unpluged from the module, which I guess is good? What would be the easiest way to check if the module is bad, mesure voltage at the speaker lead?

As for the low brightness I have a theory : could it be that the seperate guns adjustments are too low? The TV has a perfect grayscale, but pots are maybe 25% up, red a little lower.

jstout66, I just might take you up on that offer! Let me run some more test and we'll see what modules might be the culprints, and I might just ask you for those!

BTW I use Nu-Trol from Mg chemicals to clean contacts. It might not be as good as deoxit, but it cost about half the price and usually do the job.