Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 06-04-2016, 06:37 AM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,709
On the tube lineup paper shows TLL 115 D and this set has 2 power resistors an 18 and a 40 ohm and the other SAMs shows an 18 in the same place as mine only the other is in the ballast so I know my set don't take a ballast because these resistors are for sure original. There was a 6sl7 in the set but don't remember where it was and it was shorted and all the rest of the tubes were ok so I'm thinking someone put the wrong one in as the tube paper don't show a 6sl7. So on the crt chassis on the right looking in is 2 12sn7 and on the left is the round plug 25z6 6x5 then 2 12sn7 tubes. I counted including the crt 22 tubes in this set. Also there is a 6al5 in the middle of the 2 12sn7 tubes on the right looking in , I don't have that tube there and not having a ballast I have the other. The chassis that has the ballast also has 22 tubes not including the ballast. So the set you refer to is the one with the ballast and having the square plug. The other is mine , no 6sl7, no ballast, no 6al5 in that location. So if the 208 has the ballast then mine must be the 208tr chassis. The no ballast chassis has the 6x5 in the location of the ballast in the other chassis.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:49 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.